JUNE 2010
posted by admin on June 24, 2010 10:38 as General
New GCC vinyl Cutters
We have added a couple new GCC vinyl Cutters to our line up.
The First would be the GCC PUMA III , this is one of the most advanced semi pro models on the market and in the GCC line up.
The GCC Puma III cutter comes in two sizes, the 24" and the 52" both models have the optical eye for easy contour cutting and led control panel display.
Next in the GCC vinyl cutter line up would be the Jag IV professional series, this GCC vinyl cutter is one of the fastest cutters on the market today at 60 IPS and with 600 grams of downforce.
The GCC JagIV vinyl cutter comes in 4 sizes, 24",40",52" and 72" all sizes have the optical eye standard.
 comments (0)
posted by admin on June 21, 2010 11:09 as General
Hi Everyone,
Greatcut software comes with every GCC cutter and just to clarify this software is not a design software but it is however a bridge from Corel Draw, AI or Inkscape. It is a windows driver so it is set up like a printer in your printer file, this way you can easily hook up your plotter to a USB port.
The way Greatcut works is that you design in any of the above design suites and just send it to Greatcut to cut your design.
This is not a subscription software and once you have it there are no on going fees to use the Greatcut software.
If you have questions about any of our products please call us at 209-589-2182
comments (0)
|
|
|
